Tracey Concrete
 
 
 
  PARALLEL FENCING POSTS
Bent Arm Posts  Tapered Posts  Ranch Fencing  Parallel Fencing Posts 

Parallel Fencing Post (wetcast)
When fixing cross rail timber to concrete post it is best to first bolt a vertical 100x50 timber to face of post, to which the cross rails can then easily be fixed at a point of your choosing.

For wire fencing, intermediate posts can be spaced at 3.0m centres maximum. However as rails for timber fencing are supplied in 3.60m lengths, the concrete posts should be spaced at 1.8m centres to allow rails to be stagger jointed on posts.
 

* This strut is also used with 7'6" long posts

     
Specifying Fences eg: GLC 90
The first two letters indicate protection to wire or mesh:-
GL = Galvinising or PL = Plastic coated.

The third letter indicates the type of post:-
C = Concrete, S = Steel, W = Wooden.

The number indicates the height of fencing:-
90 = 900mm, 120 = 1200mm.

If a letter follows it may indicate further requirements, such as heavy duty mesh.

Click here to view diagram

Click to Order