|
Kerbs are manufactured in 36" (915mm) lengths
but can be cut to shorter lengths to form curves.
As a general rule for kerbs up to 6" wide and laid
on their edge:
915 mm (36") lengths for 9.0 m radius upwards
450 mm (18") lengths for 6.0 m radius upwards
(see Fig 1)
300 mm (12") lengths for 2.0 m radius upwards
Shorter lengths will be required for a radius less
than above.
Cut kerbs can be supplied or formed on site by
cutting a 30 mm minimum deep cut on all
exposed surfaces with a disc saw. Place kerb in
position and tap back of kerb with hammer. When
kerb breaks, position kerb to required radius
allowing a space between for grout
|
|
 |
